v2 Pan/Tilt Receiver:

  • LANC compatible camera control with the following commands:
  • Zoom in/out, Focus near/far, Rec start/stop, On-Screen Display on/off, Autofocus on/off, Iris (if supported)
  • IR Menu commands for select Canon Cameras*
  • Pan/Tilt with speed control¬† Pan: 340 degrees, Tilt +/- 15 degrees
  • Red/Green preview/program Tally LED (when controlled through system)
  • Battery or wall powered
  • Includes 12vdc wall adapter and 10ft DC extension cable
  • Maximum recommended camera weight 6lbs
  • RJ45 female connector for wired connectivity. Uses standard CAT5/6 cable up to 300′
  • Dimensions 5.8 x 4.5 x 4.0″ (14.7 x 11.4 x 10.2 cm)
  • Weight 1.7 lb (0.8 kg)
  • Requires MCZ-MCU Master Control Unit

v3 MCU – Master Control Unit:

  • Computer not required for camera control
  • Mac or PC support for basic switcher control. ¬†Advanced features available through 3rd party software.
  • Compatible with v2 pan/tilts and v3 MultiCamZilla
  • Support for Logitech Rumblepad 2 and F310
  • Motion tracking enabled by footswitch when unit placed on tripod head
  • Supports wired connection to v2 MultiCamZilla pan/tilts and v3 Ronin units via 5v RS232/TTL, and RS485
  • USB Powered

MultiCamZilla v3 for Ronin S, SC, RS2:

  • LANC compatible camera control with the following commands:
  • Zoom in/out, Focus near/far, Rec start/stop, On-Screen Display on/off, Autofocus on/off, Iris (if supported)
  • IR Menu commands for select Canon Cameras*
  • Precision motion control from MCU via motion tracking or Logitech joystick
  • LANC and Panasonic models available
  • 5v RS232 or RS485 models available
  • 300ft range on standard CAT5 cable, longer with other serial connection options
  • Powered by Ronin, external power not required
  • Requires MCZ-MCU Master Control Unit

Power Requirements:

  • v2 Pan/Tilts 12vdc 2A

*Current cameras supported for IR menu control: Canon Vixia HF-S200, HF-S20, HF-S21, HF-S30, HF-G20, HF-G30, HF-G40, XA25, XA20, XA10, XA30, XA35, GX10, XF400, XF405.